PORTFOLIO
Projektdarstellungen auf der Webseite
Jedes von der Gebert Rüf Stiftung geförderte Projekt wird mit einer Webdarstellung zugänglich gemacht, die über die Kerndaten des Projektes informiert. Mit dieser öffentlichen Darstellung publiziert die Stiftung die erzielten Förderresultate und leistet einen Beitrag zur Kommunikation von Wissenschaft in die Gesellschaft.
Self-Inflating Inner Tube
Redaktion
Für den Inhalt der Angaben zeichnet die Projektleitung verantwortlich.
Kooperation
Dieses von der Gebert Rüf Stiftung geförderte Projekt wird von folgenden weiteren Projektpartnern mitgetragen: University of Bern; PumpTire AG
Projektdaten
- Projekt-Nr: GRS-063/12
- Förderbeitrag: CHF 100'000
- Bewilligung: 24.01.2013
- Dauer: 02.2013 - 05.2014
- Handlungsfeld: Pilotprojekte, 1998 - 2018
Projektleitung
- PD Dr. Philippe Büchler, Group Head
- Universität Bern
- Institute for Surgical Technology and Biomechanics
- Stauffacherstrasse 78
- 3014 Bern (Schweiz)
- philippe.buechler@istb.unibe.ch
Projektbeschreibung
The project’s goal is to create an engineering model and rudimentary design for a self-inflating bicycle inner tube. The basis for the design is a patented technology that incorporates a pumping mechanism into the inner tube. As the wheel roles, the pumping mechanism collapses under the weight of the wheel pushing air into the inner tube. Once the load is removed the pumping mechanism returns to its original shape drawing in air for the next cycle. The project focuses on the initial analysis, design and build of an engineering model to understand the fundamentals of the system. From this model an actual prototype will be created and then optimized though iterative design optimizations. A control system will be built to regulate the pressure of the system and finally the design will be analyzed for manufacturability. The results of the project will be transferred to PumpTire AG for commercializing of the technology.
Was ist das Besondere an diesem Projekt?
The novelty in the project is 1.) that it brings self-inflating technology to bicycles and 2.) the pumping mechanism is constructed as part of the inner tube. Most concepts for self-inflating tires focus on the automotive field and incorporate the mechanism into the tire directly. Unlike automobiles, most bicycle use inner tubes. Incorporating the technology into the inner tube creates significant benefits in pricing, competition and margin.
Stand/Resultate
There were three primary results of the project.
1. We were able to complete the design of the air handling system to that it maintained its integrity at 4 bar.
2. We were able to create 2D finite element models of the pumping mechanism and gain a better understanding of how the system works.
3. We also built 10 separate prototypes combining the learnings of the first two point. However, the prototypes did not pump air.
We believe there are two factors that contributed to this. First the sytem may have benefited from additonal stiffness in the perimeter band. Second, it is believed materials touching the pumping mechanism tended to dissipate the force needed to compress the pumping mechanims.
1. We were able to complete the design of the air handling system to that it maintained its integrity at 4 bar.
2. We were able to create 2D finite element models of the pumping mechanism and gain a better understanding of how the system works.
3. We also built 10 separate prototypes combining the learnings of the first two point. However, the prototypes did not pump air.
We believe there are two factors that contributed to this. First the sytem may have benefited from additonal stiffness in the perimeter band. Second, it is believed materials touching the pumping mechanism tended to dissipate the force needed to compress the pumping mechanims.
Medienecho
Eurobike Gold Winnter 2019: AirWinder Self-Inflating Bicycle Tire
L'Agefi «Cyclisme peut-être à un tournant», 18 Avril 2013;
Bilan «50 start-up suisses dans lesquelles investir», 23 Février 2013;
Le Temps «Gonfleur ses Pneus de Velo en Pedalant», 14 Février 2012;
20 Minuten «Der Pneu, der sich selbst aufpumpt», 16 Mars 2012;
NZZ Online «Eine runde Sache», 14 Mars 2012.
L'Agefi «Cyclisme peut-être à un tournant», 18 Avril 2013;
Bilan «50 start-up suisses dans lesquelles investir», 23 Février 2013;
Le Temps «Gonfleur ses Pneus de Velo en Pedalant», 14 Février 2012;
20 Minuten «Der Pneu, der sich selbst aufpumpt», 16 Mars 2012;
NZZ Online «Eine runde Sache», 14 Mars 2012.
Links
Am Projekt beteiligte Personen
Philippe Buechler, project leader philippe.buechler@istb.unibe.ch
Benjamin Krempel bkrempel@pumptire.com
Jack Bell jack@energyflowdesigns.com
Alexander Bürki alexander.buerki@istb.unibe.ch
Benjamin Krempel bkrempel@pumptire.com
Jack Bell jack@energyflowdesigns.com
Alexander Bürki alexander.buerki@istb.unibe.ch
Letzte Aktualisierung dieser Projektdarstellung 15.10.2019